Home › Power Stations › BLUETTI Elite 100 V2
BLUETTI Elite 100 V2 Review
1,024Wh of storage, 1,800W continuous output, LiFePO4 cells. Listed at $499 at BLUETTI.
The BLUETTI Elite 100 V2 is a portable 600 1,200wh unit holding 1,024Wh. At $0.49 per watt-hour it is priced below the median for the band, which makes it one of the cheaper ways to buy this much capacity. It uses LiFePO4 cells rated for 4,000 cycles, so it is built to be kept rather than replaced.
Manufacturer price at the time of writing. We may earn a commission, which never changes what the figures say.
Computed from this unit’s published specification, not from a manufacturer claim. Method and the full catalogue comparison are in our power station price index.
What the BLUETTI Elite 100 V2 will run, and for how long
Runtimes below are calculated from the 1,024Wh rated capacity, derated to 85% for AC loads and 92% for USB and 12V loads to cover inverter and conversion losses. They are arithmetic, not lab measurements, but they are the same arithmetic applied to every unit we track, so the comparison holds. Anything drawing more than the 1,800W continuous rating is left off the list because this unit cannot carry it, though the 2,700W surge rating covers brief startup spikes from motors and compressors.
| Load | Estimated runtime |
|---|---|
| Phone charge (12Wh) | 78 charges |
| Wi-Fi router (10W) | 87 hr |
| LED work light (10W) | 94 hr |
| CPAP, humidifier off (40W) | 21 hr 46 min |
| Laptop (60W) | 14 hr 30 min |
| 12V portable fridge (45W avg) | 19 hr 21 min |
| 55-inch TV (90W) | 9 hr 40 min |
Real figures land below these. A fridge cycles rather than drawing continuously, and cold weather costs a lithium pack usable capacity, so treat the table as the ceiling rather than the expectation.
Charging and power delivery
It accepts 1,200W from a wall outlet, which the manufacturer puts at 45min to 80%,70min to 100% to full. Maximum solar input is 1,000W. At 70% of that rating, which is what a fixed panel realistically delivers across a good day, a full charge from empty is roughly 1 hr 28 min of usable sun. Switchover to battery is rated at 10ms, fast enough to keep a desktop or a router from dropping.
BLUETTI Elite 100 V2 specifications
Manufacturer figures, gathered so you can read them against everything else we track rather than against the marketing page they came from.
| Capacity | 1,024Wh |
| Continuous AC output | 1,800W |
| Surge / peak | 2,700W |
| Cell chemistry | LiFePO4 |
| Rated cycle life | 4,000 cycles |
| Weight | 25 lb |
| Max solar input | 1,000W |
| Max AC input | 1,200W |
| UPS switchover | 10ms |
| Noise | 30 dB |
| Warranty | 5 years |
| Price at BLUETTI | $499 |
| Cost per watt-hour | $0.49 |
How the BLUETTI Elite 100 V2 compares
The closest units we track from other manufacturers in the same band, matched on capacity rather than on price.
| BLUETTI Elite 100 V2 | ALLPOWERS P1800 1024Wh | Anker SOLIX C1000 Gen 2 | |
|---|---|---|---|
| Capacity | 1,024Wh | 1,024Wh | 1,024Wh |
| Output | 1,800W | 1,800W | 2,000W |
| Cycle life | 4,000 cycles | 3,000 cycles | 4,000 cycles |
| Weight | 25 lb | — | 25 lb |
| Price | $499 | $419 | $384 |
| Cost per watt-hour | $0.49 | $0.41 | $0.38 |
Where the BLUETTI Elite 100 V2 sits in its band
We track 57 units in the portable 600 1,200wh band with both a price and a published capacity. They run from $179 to $3,449, and from 99Wh to 5,040Wh. On cost per watt-hour the BLUETTI Elite 100 V2 ranks 18 of 57, where 1 is the cheapest capacity in the band. That puts it in the cheapest third, which is the single strongest thing on its spec sheet. Ranking on cost per watt-hour deliberately ignores build quality, port selection and warranty, so read it as one input rather than as the answer.
Alternatives to the BLUETTI Elite 100 V2
Units we track in the same band that are close enough to be genuine substitutes, matched on capacity. Each links to its own review.
- ALLPOWERS P1800 1024Wh review — 1,024Wh, 1,800W output, listed at $419, $0.41 per watt-hour, cheaper capacity than the BLUETTI Elite 100 V2.
- Anker SOLIX C1000 Gen 2 review — 1,024Wh, 2,000W output, listed at $384, $0.38 per watt-hour, cheaper capacity than the BLUETTI Elite 100 V2.
- Anker SOLIX 555 PowerHouse review — 1,024Wh, 1,000W output, listed at $899.99, $0.88 per watt-hour, dearer capacity than the BLUETTI Elite 100 V2.
- EcoFlow DELTA 3 Classic review — 1,024Wh, 1,800W output, listed at $619, $0.60 per watt-hour, dearer capacity than the BLUETTI Elite 100 V2.
Who the BLUETTI Elite 100 V2 suits
It is a sensible buy for van and car camping, a long weekend off-grid, and covering a fridge plus lighting and devices through a day-long outage. It is the wrong tool for whole-home backup, and sustained use of a microwave or a kettle.
BLUETTI Elite 100 V2 questions
How long will the BLUETTI Elite 100 V2 run a fridge?
A full-size fridge averages about 50W once you account for the compressor cycling on and off. From 1,024Wh, derated to 85% for inverter losses, that is roughly 17 hr 24 min on a full charge. A 12V portable fridge draws less and will run considerably longer.
Can the BLUETTI Elite 100 V2 be charged by solar?
Yes. It accepts up to 1,000W of solar input. Panels rarely hit their rated figure in the field, so plan on about 70% of the panel rating across a clear day.
Does the BLUETTI Elite 100 V2 work as a UPS?
It switches to battery in about 10ms. That is quick enough for a desktop computer, a router or a modem, all of which tolerate a gap in that range without rebooting.
What warranty does the BLUETTI Elite 100 V2 carry?
BLUETTI covers it for 5 years, and rates the cells for 4,000 charge cycles. Cycle life and warranty are different promises, and the cycle figure is the one that tells you how long the pack stays useful.
Is the BLUETTI Elite 100 V2 worth it?
At $499 it works out at $0.49 per watt-hour. It costs less per watt-hour than the median unit in its band, which is the strongest argument in its favour. Read the comparison table above against the two closest rivals before deciding.
Compare this against the alternatives
Same figures, put side by side against the units people actually cross-shop it with.
- BLUETTI AC180 vs Elite 100 V2
- BLUETTI AC70 vs Elite 100 V2
- BLUETTI Elite 100 V2 vs Anker SOLIX C1000
- Two Bluetti Elite 100 V2 vs One Elite 200 V2
How we assess these
Every figure on this page comes from the manufacturer, and every derived number, cost per watt-hour and estimated runtime, is calculated the same way for all 437 products we track. That is what makes the comparison meaningful: we are not scoring units against a private impression of them, we are putting published figures side by side and doing the arithmetic in public. Where a manufacturer stays quiet, we say so rather than filling the gap.