Home › Power Stations › BLUETTI Elite 100 V2 Bio-based
BLUETTI Elite 100 V2 Bio-based Review
LiFePO4 cells. Listed at $499 at BLUETTI.
The BLUETTI Elite 100 V2 Bio-based is a other unit. It uses LiFePO4 cells rated for 4,000 cycles, so it is built to be kept rather than replaced.
Manufacturer price at the time of writing. We may earn a commission, which never changes what the figures say.
Charging and power delivery
Maximum solar input is 1,000W. Switchover to battery is rated at 10ms, fast enough to keep a desktop or a router from dropping.
BLUETTI Elite 100 V2 Bio-based specifications
Manufacturer figures, gathered so you can read them against everything else we track rather than against the marketing page they came from.
| Cell chemistry | LiFePO4 |
| Rated cycle life | 4,000 cycles |
| Weight | 25 lb |
| Max solar input | 1,000W |
| UPS switchover | 10ms |
| Price at BLUETTI | $499 |
Where the BLUETTI Elite 100 V2 Bio-based sits in its band
We track 32 priced units in the other band, running from $50.97 to $3,149. At $499 the BLUETTI Elite 100 V2 Bio-based is the 22 cheapest of 32. Because BLUETTI does not publish a capacity for this model, we cannot rank it on cost per watt-hour, which is the measure we would normally lead with. Price position on its own tells you where it sits in the range but not whether it is good value, and those are genuinely different questions.
Alternatives to the BLUETTI Elite 100 V2 Bio-based
Units we track in the same band that are close enough to be genuine substitutes, matched on price. Each links to its own review.
- Goal Zero Yeti 500X review — 120W output, listed at $499.95.
- Renogy REGO 12V 60A DC-DC Battery Charger review — listed at $593.99.
- Goal Zero Skylight review — listed at $399.95.
- Goal Zero 30-Amp External MPPT review — listed at $349.95.
Who the BLUETTI Elite 100 V2 Bio-based suits
This is an accessory rather than a standalone product, so the question is not whether it is good in isolation but whether the system you already own needs it.
Check compatibility against your specific model before ordering: within a single manufacturer, connectors and firmware requirements change between generations more often than the marketing suggests.
What to check before you buy
- Confirm compatibility with your specific model and generation rather than with the product family.
- Check whether installation needs an electrician. Transfer switches and inlet boxes are wired into a distribution board, and in most jurisdictions that is not owner work.
- Read the warranty terms on the host unit. Third-party accessories occasionally void cover, and manufacturer accessories occasionally extend it.
BLUETTI Elite 100 V2 Bio-based questions
Can the BLUETTI Elite 100 V2 Bio-based be charged by solar?
Yes. It accepts up to 1,000W of solar input. Panels rarely hit their rated figure in the field, so plan on about 70% of the panel rating across a clear day.
Does the BLUETTI Elite 100 V2 Bio-based work as a UPS?
It switches to battery in about 10ms. That is quick enough for a desktop computer, a router or a modem, all of which tolerate a gap in that range without rebooting.
What is not published
BLUETTI does not state the watt-hour capacity, which is the single figure runtime depends on, the continuous AC output, the warranty term for this model. We list figures rather than estimate them, so those rows stay empty until the manufacturer publishes them. If you need one of them to make the decision, ask BLUETTI directly and hold them to the answer.
How we assess these
Every figure on this page comes from the manufacturer, and every derived number, cost per watt-hour and estimated runtime, is calculated the same way for all 437 products we track. That is what makes the comparison meaningful: we are not scoring units against a private impression of them, we are putting published figures side by side and doing the arithmetic in public. Where a manufacturer stays quiet, we say so rather than filling the gap.