Home › Power Stations › BLUETTI Elite 30 V2
BLUETTI Elite 30 V2 Review
288Wh of storage, 600W continuous output, LiFePO4 cells. Listed at $239 at BLUETTI.
The BLUETTI Elite 30 V2 is a portable under 600wh unit holding 288Wh. At $0.83 per watt-hour it is priced about where the rest of the band sits. It uses LiFePO4 cells rated for 3,000 cycles, so it is built to be kept rather than replaced. It lists at $239 against an $299 MSRP.
Manufacturer price at the time of writing. We may earn a commission, which never changes what the figures say.
Computed from this unit’s published specification, not from a manufacturer claim. Method and the full catalogue comparison are in our power station price index.
What the BLUETTI Elite 30 V2 will run, and for how long
Runtimes below are calculated from the 288Wh rated capacity, derated to 85% for AC loads and 92% for USB and 12V loads to cover inverter and conversion losses. They are arithmetic, not lab measurements, but they are the same arithmetic applied to every unit we track, so the comparison holds. Anything drawing more than the 600W continuous rating is left off the list because this unit cannot carry it, though the 1,500W surge rating covers brief startup spikes from motors and compressors.
| Load | Estimated runtime |
|---|---|
| Phone charge (12Wh) | 22 charges |
| Wi-Fi router (10W) | 24 hr |
| LED work light (10W) | 26 hr |
| CPAP, humidifier off (40W) | 6 hr 7 min |
| Laptop (60W) | 4 hr 5 min |
| 12V portable fridge (45W avg) | 5 hr 26 min |
| 55-inch TV (90W) | 2 hr 43 min |
Real figures land below these. A fridge cycles rather than drawing continuously, and cold weather costs a lithium pack usable capacity, so treat the table as the ceiling rather than the expectation.
Charging and power delivery
Maximum solar input is 200W. At 70% of that rating, which is what a fixed panel realistically delivers across a good day, a full charge from empty is roughly 2 hr 3 min of usable sun. Switchover to battery is rated at 10ms, fast enough to keep a desktop or a router from dropping.
BLUETTI Elite 30 V2 specifications
Manufacturer figures, gathered so you can read them against everything else we track rather than against the marketing page they came from.
| Capacity | 288Wh |
| Continuous AC output | 600W |
| Surge / peak | 1,500W |
| Cell chemistry | LiFePO4 |
| Rated cycle life | 3,000 cycles |
| Weight | 9.5 lb |
| Max solar input | 200W |
| UPS switchover | 10ms |
| Noise | 30 dB |
| Warranty | 5 years |
| Price at BLUETTI | $239 |
| Cost per watt-hour | $0.83 |
How the BLUETTI Elite 30 V2 compares
The closest units we track from other manufacturers in the same band, matched on capacity rather than on price.
| BLUETTI Elite 30 V2 | EcoFlow RIVER | Jackery Explorer 300 Plus | |
|---|---|---|---|
| Capacity | 288Wh | 288Wh | 288Wh |
| Output | 600W | — | 300W |
| Cycle life | 3,000 cycles | — | — |
| Weight | 10 lb | — | 8 lb |
| Price | $239 | $349 | $299 |
| Cost per watt-hour | $0.83 | $1.21 | $1.04 |
Where the BLUETTI Elite 30 V2 sits in its band
We track 36 units in the portable under 600wh band with both a price and a published capacity. They run from $118 to $599.95, and from 128Wh to 576Wh. On cost per watt-hour the BLUETTI Elite 30 V2 ranks 16 of 36, where 1 is the cheapest capacity in the band. That is mid-table: neither the bargain of the band nor the unit you would call overpriced. Ranking on cost per watt-hour deliberately ignores build quality, port selection and warranty, so read it as one input rather than as the answer.
Alternatives to the BLUETTI Elite 30 V2
Units we track in the same band that are close enough to be genuine substitutes, matched on capacity. Each links to its own review.
- EcoFlow RIVER review — 288Wh, listed at $349, $1.21 per watt-hour, dearer capacity than the BLUETTI Elite 30 V2.
- Jackery Explorer 300 Plus review — 288Wh, 300W output, listed at $299, $1.04 per watt-hour, dearer capacity than the BLUETTI Elite 30 V2.
- Jackery Explorer 300 v2 review — 288Wh, 300W output, listed at $269, $0.93 per watt-hour, dearer capacity than the BLUETTI Elite 30 V2.
- Jackery 300 v2 review — 288Wh, 300W output, listed at $359, $1.25 per watt-hour, dearer capacity than the BLUETTI Elite 30 V2.
Who the BLUETTI Elite 30 V2 suits
It is a sensible buy for weekend camping, a CPAP overnight, phones and laptops, and keeping a router alive through a short outage. It is the wrong tool for anything with a heating element, and any attempt to run a fridge for more than a day.
BLUETTI Elite 30 V2 questions
How long will the BLUETTI Elite 30 V2 run a fridge?
A full-size fridge averages about 50W once you account for the compressor cycling on and off. From 288Wh, derated to 85% for inverter losses, that is roughly 4 hr 54 min on a full charge. A 12V portable fridge draws less and will run considerably longer.
Can the BLUETTI Elite 30 V2 be charged by solar?
Yes. It accepts up to 200W of solar input. Panels rarely hit their rated figure in the field, so plan on about 70% of the panel rating across a clear day.
Does the BLUETTI Elite 30 V2 work as a UPS?
It switches to battery in about 10ms. That is quick enough for a desktop computer, a router or a modem, all of which tolerate a gap in that range without rebooting.
What warranty does the BLUETTI Elite 30 V2 carry?
BLUETTI covers it for 5 years, and rates the cells for 3,000 charge cycles. Cycle life and warranty are different promises, and the cycle figure is the one that tells you how long the pack stays useful.
Is the BLUETTI Elite 30 V2 worth it?
At $239 it works out at $0.83 per watt-hour. It costs less per watt-hour than the median unit in its band, which is the strongest argument in its favour. Read the comparison table above against the two closest rivals before deciding.
How we assess these
Every figure on this page comes from the manufacturer, and every derived number, cost per watt-hour and estimated runtime, is calculated the same way for all 437 products we track. That is what makes the comparison meaningful: we are not scoring units against a private impression of them, we are putting published figures side by side and doing the arithmetic in public. Where a manufacturer stays quiet, we say so rather than filling the gap.